Thông số kỹ thuật:
Analog Audio Input: XLR and 1/4" balanced (T/R/S)
Input Level: -2dBu to +20dBu, balanced; -22dBu to 0dBu, unbalanced
Input Impedance: 100kΩ, balanced;50kΩ, unbalanced
Analog Audio Output: XLR and 1/4"T/R/S balanced
Output Level: +18dBm, balanced;+4dBm, unbalanced
Output Impedance: 125Ω, balanced
Digital Audio Input: XLR, AES/EBU; Coaxial RCA, S/PDIF
Format: AES/EBU, balanced; S/PDIF, unbalanced
Sample Rate: 44.1kHz and 48kHz
Digital Audio Output: XLR, AES/EBU; Coaxial RCA, S/PDIF
Format: AES/EBU, balanced; S/PDIF, unbalanced
Sample Rate: 44.1kHz and 48kHz
Conversion 24-bit A/D;24-bit D/A
Internal Audio DSP: 24-bit (PCM 81);20-bit (PCM 91)
Frequency Response: 10Hz - 20kHz ±.5dB
Crosstalk: -55dB 10Hz to 20kHz
THD: <0.006%, 10Hz - 20kHz
Dynamic Range: D/A:>98dB typical, 10Hz - 20kHz ,A/D:>105dB typical, 10Hz- 20kHz, A/A:>96dB typical, 10Hz - 20kHz
MIDI Interface: 5-pin DIN connectors for MIDI IN, THRU and OUT
Footswitch: 1/4"T/R/S connector for two independent momentary footswitches (system detects normal-open, or normal-closed on power up)
Foot Controller: 1/4"T/R/S connector for foot pedal(100Ω- 10kΩimpedance) Memory Card
Connector: PCMCIA type l cards, 68 pins
Standards: PCMCIA 2.0 and JEIDA 4.0
Card Format: Up to 1MB of SRAM (attribute memory not required)
Power Requirements: 100 - 240 volts AC;50 - 60Hz;35 watts, Automatic switching (3-pin IEC connector)
Remote Power In: 2.5 mm 9 volts AC (not included)
Dimensions: 19" W x 1.75" H (1U) x 12" D
(483 x 45 x 305 mm), rack mount standard
Weight: 6.4 lbs.(2.9 kg)
Operating Temperature: 32°to 104°F (0°to 40°C)
Maximum Humidity: 95% without condensation
|